|
|
| |
| |
 |
These Photos are provided for
viewing purposes only. If any of these photos are intended to
be reproduced and/or published, prior written authorization
is required from Clone Stone Manufacturing, Inc.
TECHNICAL INFORMATION:
Clone Stone Manufacturing, Inc. products are maintenance free
after proper installation. To clean off normal dust and dirt
simply spray off with water. For interior stone use a shop vacuum,
avoid anything that will scratch or disfigure the surface of
the stone such as a wire brush or acid products.
On occasions efflorescence can occur on Clone Stone Manufacturing,
Inc. products. To remove efflorescence make sure the stone is
completely dry. Scrub with a stiff bristle brush only (NO WIRE
BRUSH) and clear water, then rinse. For more difficult efflorescence
problems, scrub thoroughly with a solution of one part household
vinegar to five parts water. Rinse thoroughly.
On all natural stone occasionally some scuffing occurs. Some
scuffing can occur on the surface of Clone Stone Manufacturing,
Inc. products, this gives it a natural look.
---------------------------------------------------------------------------------------------------
NOTICE:
The photographs in this website represent the actual stone colors
and textures to the best of our ability with current development
techniques. Although we feel the pictures are accurate representations,
lighting conditions and other factors may make photos appear
slightly different than the actual stone color. It is recommended
that a sample of the stone be obtained from the manufacturer
or distributor before making a final decision.
NEW PRODUCTS:
Clone Stone product line is constantly expanding and may not
be fully represented in this website. Be sure to ask a Clone
Stone representative about new or upcoming products.
| ALL
COLORS AVAILABLE IN ANY TYPE OF STONE |
|
|
|
